{"data":{"type":"company_profile","id":43188,"entity_id":"wefunder:company:43188","attributes":{"canonical_url":"https://wefunder.com/aptera","generated_at":"2026-06-03T22:24:33Z","updated_at":"2026-06-02T05:00:21Z","entity_ids":{"company":"wefunder:company:43188","slug":"wefunder:company_slug:aptera"},"profile_visibility":{"owner_published":true,"public_search_results":true,"site_search_listed":false,"privacy_mode":"unlisted","invite_only":false},"provenance":{"source":"wefunder_public_company_profile","as_of":"2026-06-03T22:24:33Z","claims":{"total_amount_raised":{"source":"FrontCompanySummary#amount_raised","last_verified_at":"2026-06-02T05:00:21Z","as_of":"2026-06-03T22:24:33Z","confidence":"high"},"total_investors":{"source":"FrontCompanySummary#number_of_investors","last_verified_at":"2026-06-02T05:00:21Z","as_of":"2026-06-03T22:24:33Z","confidence":"high"},"active_raise_states":{"source":"Fundraise.visible(nil, nil)","last_verified_at":"2025-06-08T15:20:55Z","as_of":"2026-06-03T22:24:33Z","confidence":"high"},"latest_fundraise_state":{"source":"Fundraise.visible(nil, nil).order(funding_started_at)","last_verified_at":"2025-06-08T15:20:55Z","as_of":"2026-06-03T22:24:33Z","confidence":"medium"}}},"company":{"id":43188,"entity_id":"wefunder:company:43188","slug":"aptera","name":"Aptera Motors ","tagline":"The world's first Never Charge solar vehicle!\r\n","elevator_pitch":"We believe we build the most efficient transportation on the planet. Science drives our approach to building better vehicles and the result is something that can travel over 1,000 miles on a single charge. We believe our focus on efficiency will benefit the planet by using our resources more wisely and polluting less.","story":"Our apologies! We have well exceeded the SEC mandated $550k cap on this round. But we will hopefully be opening up a new round in March/April of this year. Please sign up for updates at the bottom of www.Aptera.us or follow us on social media to stay up to date.\u0026nbsp; Thank you for your amazing support!\u0026nbsp;------Our StoryIn 2005, Aptera’s founder, Steve Fambro, frustrated by horrible gas mileage and freeway congestion, endeavored to design a vehicle more efficient than any other. His goal was to legally drive in the carpool lanes of Southern California in a safe, fuel-conscious vehicle. He began researching low-drag aerodynamics and composite aircraft construction methods.Through a mutual friend, he met Chris Anthony in San Diego who also had\u0026nbsp;an interest in composites. Chris was building his innovative wakeboard boat line with a novel and eco-friendly\u0026nbsp;resin infusion process that would be a perfect fit for a lightweight composite structure for vehicles. Together they worked on a new monocoque safety cell structure for the Aptera,\u0026nbsp;followed by a prototype vehicle with two seats and three wheels. This\u0026nbsp;proved Steve’s hypothesis that a low-drag, aerodynamic body shape doesn’t sacrifice comfort, drivability, or safety.The first operating prototype achieved over 300 miles per gallon(mpg) and was a great inspiration\u0026nbsp;to the new Aptera that you see above. By 2009, Aptera Motors had over 50 employees, several prototypes, and a production-intent vehicle that was ready to be manufactured.Unfortunately, the new management team set the company on a path that required a $400M+ loan from the Department of Energy. The time it took to receive the loan was far too long for the company to survive, and the company ceased operations and was\u0026nbsp;liquidated in 2011.Now, with renewed vigor and access to better technologies, Aptera is back to establish an automotive brand that delivers the “future”. Our advanced designs lever aerodynamics, clever lightweight materials, and efficient drivetrains to create a product portfolio of outstandingly safe, efficient, long-range electric vehicles that are also a blast to drive.FinancesAptera is currently gathering early-stage investments to design, manufacture, and distribute the Aptera electric vehicle. Our first fundings will be used to finalize, test, and optimize a production-intent design of the Aptera. After that, we will raise production ramp funds and begin manufacturing of the world’s most efficient vehicles.Steve and Chris are looking for investors who share their vision for efficient, sustainable transportation that has a meaningful impact on people’s lives.\u0026nbsp;Our initial target price is between $26K - $49K. And our initial target build cost is between $21K - $33K. By 2022, we expect to realize margins of 35%. However, please note that these numbers may change once we start production. These are future projections and cannot be guaranteed.The Aptera DesignOur design ethos distinguishes us from all other vehicle manufacturers, as we respect the high economic and environmental cost we pay for transportation. We have changed the fundamental design criteria for vehicles. Instead of designing for styling or lifestyle aesthetic, the Aptera emphasizes efficiency and safety. By doing so, Aptera has distinct advantages over any passenger vehicle currently being produced.Our vehicle makes use of superior aerospace quality composites for safety and weight savings and advanced aerodynamics for unprecedented low-drag performance. These two features plus an extremely efficient powertrain and a low rolling-resistance design make the Aptera the most efficient vehicle available today.All of this yields a vehicle that is more efficient, cheaper to build, safer, and better for the environment than anything available today. We hope you will join us in building a more efficient\u0026nbsp;future for transportation. This is the first step in our plan to positively impact the planet and as many peoples' lives as we can. The next step is putting as many Apterae as we can on the roadways of the world. We truly appreciate your time in evaluating our potential.\u0026nbsp;Driven by the Sun!*Our Never Charge Solar package provides over 40 miles a day and over 11,000 miles a year of free solar charging\u0026nbsp;in many places. This is in addition to the battery pack range of up to 1,000+ miles when fully charged. Check our website: www.Aptera.us for a solar calculator that will show you the solar yield in your area.**Also have a look at the download link above to a view .pdf with more detail on our approach, product, and team.","location":"San Diego, CA","website":"https://www.Aptera.us","total_amount_raised":2793473,"total_investors":2195,"is_funded":true,"is_active":true,"quality_score":5,"related_urls":["https://wefunder.com/aptera","https://www.Aptera.us"]},"media":{"share_image_url":"https://uploads.wefunder.com/uploads/company/header_media_photo/43188/xxl_cropped_aptera_2.jpg","logo_url":"https://uploads.wefunder.com/uploads/company/logo/43188/large_cropped_ApteraLogo_DarkStackedTRANS.png","header_media_url":"https://uploads.wefunder.com/uploads/company/header_media_photo/43188/standard_cropped_aptera_2.jpg","cover_photo_url":"https://uploads.wefunder.com/uploads/company/header_media_photo/43188/standard_cropped_aptera_2.jpg","profile_video_url":"https://wefunder.wistia.com/medias/naxiegqkxl"},"links":{"company_url":"https://www.Aptera.us","twitter_url":"http://twitter.com/aptera_motors","facebook_url":"https://www.facebook.com/ApteraMotors3.0/","instagram_url":"https://www.instagram.com/aptera_motors/"},"highlights":[],"quick_facts":[{"index":1,"claim_id":"claim-fact-1","value":"In addition to its 1,000+ mile battery range, the Aptera can\u0026nbsp;travel 40+ miles a day on the free power from its integrated solar panels."},{"index":2,"claim_id":"claim-fact-2","value":"Gas cars are inefficient and EVs today aren't efficient enough."},{"index":3,"claim_id":"claim-fact-3","value":"The Aptera is aerodynamic, lightweight, strong, and fun to drive!"},{"index":4,"claim_id":"claim-fact-4","value":"By 2022, we expect to realize margins of 35% selling 10,000 units per year."},{"index":5,"claim_id":"claim-fact-5","value":"Each Aptera owner could reduce their carbon footprint by over 14,000 pounds of CO2 per year."},{"index":6,"claim_id":"claim-fact-6","value":"It's safe. The Aptera has a passenger safety cell stronger than that of any other vehicle on the road today."},{"index":7,"claim_id":"claim-fact-7","value":"It's affordable. The Aptera uses less material to build making it cheaper to manufacture."}],"team":[{"id":487724,"entity_id":"wefunder:company_role:487724","user_entity_id":"wefunder:user:253828","role":"founder","name":"Chris Anthony","title":"CEO","bio":"Founded Flux Power, IPO 2009. A Lithium-ion battery producer reducing 1,000+ tons of CO2/year in industrial markets. Founded Epic Boats 2002. CFD based boat designs built with environmentally friendly technologies.","avatar_url":"https://uploads.wefunder.com/uploads/company_role/custom_photo/487724/square_cropped_chris.jpg?1566801631","profile_url":"https://wefunder.com/chrisanthony","linkedin_url":"https://www.linkedin.com/in/chris-anthony-81935b12/","related_urls":["https://wefunder.com/chrisanthony"]},{"id":663994,"entity_id":"wefunder:company_role:663994","user_entity_id":"wefunder:user:258620","role":"founder","name":"Steve Fambro","title":"CEO","bio":"Founded Famgro, built the world's largest automated pesticide/herbicide-free farm which saves over 4M gallons of water per year. Venture Partner of Ocean Holdings, which advances clean and renewable projects around the world.","avatar_url":"https://uploads.wefunder.com/uploads/company_role/custom_photo/663994/square_cropped_Steve.jpg?1567369706","profile_url":"https://wefunder.com/stevefambro","linkedin_url":"https://www.linkedin.com/in/steve-fambro-184b515/","related_urls":["https://wefunder.com/stevefambro"]},{"id":1106070,"entity_id":"wefunder:company_role:1106070","user_entity_id":"wefunder:user:1053211","role":"employee","name":"Sarah Hardwick","title":"CMO","bio":"Founder of award-winning communications firm that launched Aptera into the spotlight a decade ago, helped to build and nurture a loyal community of fans who have since followed Aptera to become investors and a founding part of the company’s success.","avatar_url":"https://uploads.wefunder.com/uploads/company_role/custom_photo/1106070/square_cropped_IMG_3071_.jpg?1671486786","profile_url":"https://wefunder.com/sarahhardwick","personal_url":"http://www.zenzi.com","linkedin_url":"https://www.linkedin.com/in/sarahhardwick/","twitter_url":"https://twitter.com/SarahZ","related_urls":["https://wefunder.com/sarahhardwick","http://www.zenzi.com"]}],"featured_investors":[{"id":4853,"entity_id":"wefunder:company_investor_profile:4853","investor_profile_id":636018,"investor_profile_entity_id":"wefunder:investor_profile:636018","subject_entity_id":"wefunder:user:1095058","name":"John Overstreet","bio":"Helping the world communicate, and creating a \"social lubricant\" (wine) on the side. Driving on energy from the sun since 2011.","avatar_url":"http://uploads.wefunder.com/uploads/user/avatar/1095058/medium_cropped_Reddy_kiloWatt_cropped.jpg","profile_url":"https://wefunder.com/johnboverstreet","investment_total":20000,"investment_info":"Invested $20,000 this round","is_lead_investor":true,"related_urls":["https://wefunder.com/johnboverstreet"]}],"investor_memos":[],"tab_counts":{"posts":26,"ask_questions":680,"featured_investors":1,"faq_entries":5},"active_fundraises":[{"id":41115,"entity_id":"wefunder:fundraise:41115","state":"successful","offering_type":"506(c)","funding_type":"note","structure":"safe","security_type":"equity","currency":"USD","testing_the_waters":false,"min_purchase":100,"max_purchase":9,"funding_target":250000.0,"funding_started_at":"2021-01-15T19:40:01Z","funding_closed_at":"2021-01-15T19:40:01Z"},{"id":37276,"entity_id":"wefunder:fundraise:37276","state":"successful","offering_type":"4(a)(6)","funding_type":"note","structure":"safe","security_type":"equity","currency":"USD","testing_the_waters":false,"min_purchase":100,"max_purchase":9,"funding_target":100000.0,"funding_started_at":"2020-09-18T22:45:54Z","funding_closed_at":"2020-12-17T05:03:29Z","auto_close_at":"2020-12-17T04:59:59Z"},{"id":28189,"entity_id":"wefunder:fundraise:28189","state":"successful","offering_type":"4(a)(6)","funding_type":"note","structure":"safe","security_type":"equity","currency":"USD","testing_the_waters":false,"min_purchase":100,"max_purchase":9,"funding_target":100000.0,"funding_started_at":"2019-08-28T00:43:51Z","funding_closed_at":"2020-04-01T05:01:07Z","auto_close_at":"2020-04-01T03:59:59Z"}],"latest_fundraise":{"id":41115,"entity_id":"wefunder:fundraise:41115","state":"successful","offering_type":"506(c)","structure":"safe","testing_the_waters":false,"can_invest_now":false,"funding_started_at":"2021-01-15T19:40:01Z","funding_closed_at":"2021-01-15T19:40:01Z","terms":{"eb":null,"nb":"$40M","txt":"valuation cap"}},"recent_posts":[{"id":139843,"entity_id":"wefunder:feed_item:139843","type":"FeedItem::Update","visibility":"public","title":"$100 Million in Orders \u0026amp; a Viral Video","preview":"When we launched Aptera last week, we were hopeful the world would see the potential of an ultra-efficient vehicle that can travel farther than any other and charge itself with the power of the sun. However, we never could have imagined the outpouring of interest and support that has followed our announcement. We quickly sold out of our Aptera Paradigm and Paradigm+ editions on the first day, and things haven't slowed down since. It's with excitement and gratitude we announce we've accepted o...","published_at":"2020-12-12T20:18:18Z","author_name":"Chris Anthony","url":"/feed/139843","canonical_url":"https://wefunder.com/feed/139843"},{"id":138834,"entity_id":"wefunder:feed_item:138834","type":"FeedItem::Update","visibility":"public","title":"Aptera Snags an Additional $1 Million in Capital to Manufacture Efficient Never Charge Solar Vehicle","preview":"Vista, CA, November 9, 2020 --\u0026nbsp;Aptera Motors, creator of the world’s most technically advanced solar vehicle, has secured an additional $1 million in capital to supplement its WeFunder raise of $389,496+. This investment came in at the same valuation terms as Aptera’s current crowdfunding efforts. These funds will help the electric vehicle pioneer continue launch and development efforts into 2021. In the coming weeks, the company will be revealing the first of its current build of vehicl...","published_at":"2020-11-09T20:45:32Z","author_name":"Chris Anthony","url":"/feed/138834","canonical_url":"https://wefunder.com/feed/138834"},{"id":138636,"entity_id":"wefunder:feed_item:138636","type":"FeedItem::Update","visibility":"public","title":"It's Taking Shape!","preview":"Aptera is taking shape, and she's almost ready to meet the world. When we launch, we'll reveal the first of our current build of vehicles. The second and third will follow shortly by the end of the year. Because we use the same data to create our visuals as we do to produce our tooling, the Aptera underneath this cover looks like our renderings down to the tiniest detail. When we announce our launch, we'll be offering priority access to deposit holders, investors, ambassadors, and employees w...","published_at":"2020-10-31T08:11:00Z","author_name":"Chris Anthony","url":"/feed/138636","canonical_url":"https://wefunder.com/feed/138636"},{"id":138465,"entity_id":"wefunder:feed_item:138465","type":"FeedItem::Update","visibility":"public","title":"We're in the Game!","preview":"While our Apterae are being assembled and our team is looking ahead to the future, this week's newsletter is a nostalgic treat. Many Aptera fans (and plenty of us on the team) have loved Grand Theft Auto since it came out, and spent countless hours in the imagined world of GTA V. One of those fans created this incredible and immersive video of Aptera in the GTA world. Take a look while we wait in anticipation of GTA 6 and our next Aptera announcement!\u0026nbsp;Have a great weekend! - Team at Aptera","published_at":"2020-10-25T04:26:44Z","author_name":"Chris Anthony","url":"/feed/138465","canonical_url":"https://wefunder.com/feed/138465"},{"id":138290,"entity_id":"wefunder:feed_item:138290","type":"FeedItem::Update","visibility":"public","title":"Putting it ALL Together!","preview":"It’s been a BUSY last few weeks for Aptera. We now have almost all the parts for our first development vehicles, and within days those final parts will come in from vendors and our Aptera build shops all over the world (San Diego, Reno, San Jose, Canada, New Zealand). Then it’s time to assemble and fine-tune!We have our beautiful suspension parts waiting for their new home in our first vehicles. Through our use of AI Generative Design, we’re able to lighten these parts significantly, which ad...","published_at":"2020-10-18T05:27:52Z","author_name":"Chris Anthony","url":"/feed/138290","canonical_url":"https://wefunder.com/feed/138290"},{"id":137481,"entity_id":"wefunder:feed_item:137481","type":"FeedItem::Update","visibility":"public","title":"A new chance to invest and get your pre-order coupon early!","preview":"As we near completion of our first new development vehicles, we’ve been flooded with interest from Aptera investors and fans who have waited for this moment and want to be a part of making it happen. We’re only weeks away from launch now and we’ll be moving at light speed once we hit that milestone and then we’ll turn focus to delivering the first Apterae in 2021. For those of you who share our vision for efficient, sustainable transportation, this is a new opportunity to become a bigger part...","published_at":"2020-09-18T23:42:24Z","author_name":"Chris Anthony","url":"/feed/137481","canonical_url":"https://wefunder.com/feed/137481"},{"id":136370,"entity_id":"wefunder:feed_item:136370","type":"FeedItem::Update","visibility":"public","title":"Help us with info for a sneak peek!","preview":"Aptera’s launch is within sight! We’re grateful to our loyal fans and investors who have helped to shape Aptera into what it is today. We value your feedback tremendously, and we'd like to ask a favor.🤞Please click the link below to take a short survey. To say thanks, we’ll reveal some brand new, never-before-seen images including a first look at Aptera's new interior. Click here to start the survey.And look for weekly updates as we get closer to the finish line. Thanks,Aptera","published_at":"2020-08-11T20:58:27Z","author_name":"Chris Anthony","url":"/feed/136370","canonical_url":"https://wefunder.com/feed/136370"},{"id":136085,"entity_id":"wefunder:feed_item:136085","type":"FeedItem::Update","visibility":"public","title":"Extreme Talent and Great Progress!","preview":"Our engineering department has been working around the clock to complete the first run of initial test prototypes and move Aptera closer to production. Our leadership team is also growing! We’re excited to announce that two of Aptera’s original team members will be re-joining the company: Nathan Armstrong as Chief Technology Officer and Sarah Hardwick as Chief Marketing Officer.Armstrong, who will be taking on the role of Chief Technology Officer, started working on the first Aptera in 2005 a...","published_at":"2020-08-01T22:27:04Z","author_name":"Chris Anthony","url":"/feed/136085","canonical_url":"https://wefunder.com/feed/136085"},{"id":134886,"entity_id":"wefunder:feed_item:134886","type":"FeedItem::Update","visibility":"public","title":"Release to BUILD!","preview":"We've been busy finalizing our development vehicle design and now it's time to BUILD!From windshields to license plate holders we've been finalizing everything Aptera. That means releasing parts internally to build or to vendors to supply to us. The effort is moving along nicely, even with COVID delays, and all of our structural components are now released along with our suspension. We are now knee-deep in electrical engineering while finishing up the interior, exterior covers, and our lighti...","published_at":"2020-06-28T00:34:37Z","author_name":"Chris Anthony","url":"/feed/134886","canonical_url":"https://wefunder.com/feed/134886"},{"id":133848,"entity_id":"wefunder:feed_item:133848","type":"FeedItem::Update","visibility":"public","title":"The Aptera Family is Growing FAST!","preview":"We've now added over 1,200 new Aptera equity owners, over 50,000 Aptera followers, and grown our engineering team from just 15 two months ago to over 60 talented people\u0026nbsp;now.The final tally is in on our crowdfunding and we are VERY thankful for the more than 1,200 people that put their support firmly behind our vision for transportation efficiency. This fully funds our efforts to build our development vehicles this summer and use the knowledge learned from them to develop our production-i...","published_at":"2020-05-15T02:00:30Z","author_name":"Chris Anthony","url":"/feed/133848","canonical_url":"https://wefunder.com/feed/133848"},{"id":132081,"entity_id":"wefunder:feed_item:132081","type":"FeedItem::Update","visibility":"public","title":"Last Chance to Invest in Aptera!!!","preview":"With just a few hours left to invest, I wanted to remind all our followers why they should support Aptera. Aside from being fully funded(we've raised over $2.5m over the last few months) and making a LOT of engineering progress(see our updates) Aptera is:1. The most efficient vehicle platform ever offered: 1,000miles of range per charge, 100Wh/Mile energy use(more than\u0026nbsp;3X more efficient than the average\u0026nbsp;EV), and charging of over 150miles overnight off a 110v outlet.2. Powered by the...","published_at":"2020-03-31T00:56:35Z","author_name":"Chris Anthony","url":"/feed/132081","canonical_url":"https://wefunder.com/feed/132081"},{"id":132024,"entity_id":"wefunder:feed_item:132024","type":"FeedItem::Update","visibility":"public","title":"EV World Podcast Time! Only 2 days left to Invest!!!","preview":"A great new EV World Podcast! Talking everything Aptera with Steve and Chris: http://evworld.com/interview.php?audioID=92And there are only 2 days left to invest or to increase your current investment! Don't let this opportunity pass you by! Imagine investing in Tesla in their early days. You couldn't back then, it was only VCs and the wealthy that could. But today, through WeFunder, you can invest early in Aptera!!!Thanks for all your support!","published_at":"2020-03-30T00:27:53Z","author_name":"Chris Anthony","url":"/feed/132024","canonical_url":"https://wefunder.com/feed/132024"},{"id":132009,"entity_id":"wefunder:feed_item:132009","type":"FeedItem::Update","visibility":"public","title":"Solar Powered Camping with Aptera!!!","preview":"Imagine driving 300 miles to camp and creating your own\u0026nbsp;power from the sun while you're there. You could cook, power your electronics, run your heat or AC, and STILL have enough power to drive home easily!!! It's a new way to think about outdoor adventuring! All made possible through extreme efficiency, a utility friendly platform, and integrated solar power!Only 3 more days to invest so hit that invest button now or share where you can.\u0026nbsp;Thanks!","published_at":"2020-03-29T01:14:24Z","author_name":"Chris Anthony","url":"/feed/132009","canonical_url":"https://wefunder.com/feed/132009"},{"id":131783,"entity_id":"wefunder:feed_item:131783","type":"FeedItem::Update","visibility":"public","title":"New Aptera video \"oil\" and only 7 days left to Invest!!!","preview":"If used correctly petroleum is an amazing resource for so many things we use every day. But burning oil for our transportation needs is just wasteful and bad engineering. You can Do More by using a vehicle that uses less material to build and far less energy to move.\u0026nbsp;And there are only 7 days left to invest so please spread the word where you can before we close this round on March 31st. Each investment is a vote of confidence in greener transportation! And you can increase your investme...","published_at":"2020-03-24T22:38:02Z","author_name":"Chris Anthony","url":"/feed/131783","canonical_url":"https://wefunder.com/feed/131783"},{"id":131665,"entity_id":"wefunder:feed_item:131665","type":"FeedItem::Update","visibility":"public","title":"Over 1,000 Investors!!! And LOTS of Trees!!!","preview":"We've got a LOT of support now and we are VERY appreciative!!!We also planted a LOT of trees with the help or our investors. 134 to be exact. We planted one tree for each perk we sent out to offset shipping emissions. These perks went out to our investors that closed their investment on or before November 2nd. Also, we gave people the option of foregoing their perks so we could plant even more trees. Don’t worry if you closed your investment after November 2nd, we will send out more in April ...","published_at":"2020-03-22T23:37:41Z","author_name":"Chris Anthony","url":"/feed/131665","canonical_url":"https://wefunder.com/feed/131665"},{"id":131652,"entity_id":"wefunder:feed_item:131652","type":"FeedItem::Update","visibility":"public","title":"10 More Days to Invest!","preview":"There's a lot going on for Aptera while we close out our first crowdfunding!We hope everyone is well and taking care of themselves, their family, and their friends during these trying times. For Aptera, not much has changed with our development plans as our engineering groups are small and spread out over San Diego, LA, Reno, and Canada. Our engineering is running smoothly, and our mold and part building continues. The only delays we’ve seen have been in the delivery of materials for these ef...","published_at":"2020-03-21T21:15:16Z","author_name":"Chris Anthony","url":"/feed/131652","canonical_url":"https://wefunder.com/feed/131652"},{"id":130250,"entity_id":"wefunder:feed_item:130250","type":"FeedItem::Update","visibility":"public","title":"Aptera just closed a $2M private round!","preview":"Now our development efforts shift into high gear, driving Aptera closer to production!(From our Press Release)San Diego, CA., Feb. 28, 2020 — Aptera Motors, maker of the world’s most efficient passenger vehicles, has closed a $2m round of private financing. This round supplements Aptera’s current crowdfunding efforts at www.WeFunder.com/Aptera, where the company has already raised over 300% of their goal. Together, this fully funds Aptera’s development plan to build and test development vehic...","published_at":"2020-02-28T21:59:26Z","author_name":"Chris Anthony","url":"/feed/130250","canonical_url":"https://wefunder.com/feed/130250"},{"id":129660,"entity_id":"wefunder:feed_item:129660","type":"FeedItem::Update","visibility":"public","title":"We welcomed 210 new investors today!","preview":"Another rolling close has brought 210 more investors into the Aptera family. This brings us ever closer to finishing our campaign here on March 31st. We can't thank everyone enough for the support.We've also finished our first set of molds. This is for the hood inner and outer and we will be using them to build our first vehicle parts in the next two weeks.We've also released our nosecone parts to tooling. ALL our aerodynamics start at the nose so this is an IMPORTANT part!\u0026nbsp;Then we will ...","published_at":"2020-02-22T00:39:53Z","author_name":"Chris Anthony","url":"/feed/129660","canonical_url":"https://wefunder.com/feed/129660"},{"id":129365,"entity_id":"wefunder:feed_item:129365","type":"FeedItem::Update","visibility":"public","title":"Aptera's first cuts!","preview":"We've been finalizing body parts and the cutting has begun!This is our\u0026nbsp;first \"plug\" being produced. It's for our hood inner liner and it will serve to make a \"mold\" which we will then use to\u0026nbsp;make\u0026nbsp;resin-infused composite\u0026nbsp;parts for our development vehicles. If there are no changes after validation this could be our first production tool!We also have our investor perks coming together. A final polish and these will be ready to ship along with our art prints(still at the print...","published_at":"2020-02-15T06:17:58Z","author_name":"Chris Anthony","url":"/feed/129365","canonical_url":"https://wefunder.com/feed/129365"},{"id":127979,"entity_id":"wefunder:feed_item:127979","type":"FeedItem::Update","visibility":"public","title":"2020 - Let it BEGIN!","preview":"The new year has been a busy one for Aptera! Our engineering groups in San Diego, Los Angeles, Nevada, Canada, and Slovenia are all working hard to bring the first new Apterae to life.In San Diego, we've started\u0026nbsp;outfitting our 3D print lab to begin tooling some of the first new vehicle parts. Our biggest new FDM printer can print parts 1.2 meters long and .6m tall. It will be great for tooling parts like our wheel covers and of lot of our interior parts.And our SLA resin printers can bui...","published_at":"2020-01-10T00:08:30Z","author_name":"Chris Anthony","url":"/feed/127979","canonical_url":"https://wefunder.com/feed/127979"},{"id":127798,"entity_id":"wefunder:feed_item:127798","type":"FeedItem::Update","visibility":"public","title":"We have over 500 new Aptera Owners!","preview":"We completed our first rolling close and welcomed over 500 new Aptera owners to the family! Don't worry if you haven't received your final closing documents this time around. That just means WeFunder will finalize your investment during our next close.Thanks for all the support! We are now using the over $200k in capital we closed on to progress our engineering through year-end. This will allow us to begin releasing parts to build in the new year and hopefully have running validation vehicles...","published_at":"2019-12-21T00:52:18Z","author_name":"Chris Anthony","url":"/feed/127798","canonical_url":"https://wefunder.com/feed/127798"},{"id":126635,"entity_id":"wefunder:feed_item:126635","type":"FeedItem::Update","visibility":"public","title":"The world's first Never Charge electric vehicle!","preview":"Grid Independence is here! Never touch a charge cord again with Aptera's new on-vehicle solar package. It comes standard on every Aptera because it is simply the most efficient way to power your vehicle.Our Never Charge system can provide over 40 miles a day and over 11,000 miles per year of plug free driving. This is enough power to meet the needs of most drivers and makes this truly the first grid-independent electric vehicle option in the world.\u0026nbsp;This announcement comes after we've fil...","published_at":"2019-10-10T18:33:10Z","author_name":"Chris Anthony","url":"/feed/126635","canonical_url":"https://wefunder.com/feed/126635"},{"id":126469,"entity_id":"wefunder:feed_item:126469","type":"FeedItem::Update","visibility":"public","title":"The motors are IN the wheels!","preview":"Our first BIG supply agreement is with Elaphe for their innovative in-wheel motor technologies.Elaphe's exceptional in-wheel motor technologies give\u0026nbsp;Aptera exceptional ride comfort, sporty performance, and tunable efficiency to assure the lowest energy usage possible.View the full release here:\u0026nbsp;Aptera chooses Elaphe for their innovative in-wheel motor technologies","published_at":"2019-10-03T16:54:52Z","author_name":"Chris Anthony","url":"/feed/126469","canonical_url":"https://wefunder.com/feed/126469"},{"id":126313,"entity_id":"wefunder:feed_item:126313","type":"FeedItem::Update","visibility":"public","title":"Aptera, it's HUGE! Surfboards, kayaks, or luggage, it carries them all with ease!","preview":"We've been getting a lot of questions about how big the Aptera is and how much it can carry. Here are some answers.","published_at":"2019-09-27T22:29:52Z","author_name":"Chris Anthony","url":"/feed/126313","canonical_url":"https://wefunder.com/feed/126313"},{"id":125631,"entity_id":"wefunder:feed_item:125631","type":"FeedItem::Update","visibility":"public","title":"We have a website up!","preview":"Great info and forums so you can discuss everything Aptera and other EVs.\u0026nbsp;Please, take a look. www.Aptera.us","published_at":"2019-09-11T01:16:51Z","author_name":"Chris Anthony","url":"/feed/125631","canonical_url":"https://wefunder.com/feed/125631"}],"q_and_a":[{"id":61922,"entity_id":"wefunder:comment:61922","question":"Hi Chris, Just a thought... could you feature Aptera on Jay Leno's Garage show again? Gain more public awareness, generate more demand. Be proud of being a pheonix rising from the ashes!","author_name":"Helen Ruan","votes":21,"created_at":"2019-09-06T09:02:53Z","canonical_url":"https://wefunder.com/aptera#question-61922","answers":[{"id":61960,"entity_id":"wefunder:comment:61960","answer":"That's a great idea. Jay does a great show and he was very kind to have us on his show in the past. He knows ALL when it comes to automotive history and he covers a lot of future tech. We will reach out to him when we have driveable pre-production vehicles to show him. Thanks for the support!","author_name":"Chris Anthony","votes":21,"created_at":"2019-09-06T20:26:51Z"}]},{"id":109378,"entity_id":"wefunder:comment:109378","question":"Hello Chris and the entire team, First off, I wish to echo G. Andris Vaskis and some of the others and thank you for your extensive time and energy it must take for you to personally respond to investors and even fans on this page! I’m an investor and I have been a fan of the design for over a decade! Like some others, I wanted to make a deposit on the first go around, but could not since I didn’t live in California. I’ve attempted to read through these posts to ask intelligent questions, but I apologize if there is still a repeat. I’ve also tried to highlight the main topic of each question. 1. I want to strongly encourage the 3RD SEAT, as soon as possible. This greatly improves the practicality of the vehicle, and I think that is the ultimate goal here: to have an ultra efficient vehicle that you can incorporate into your everyday life. The vast majority of the population has children in their home for much of their adult lives. I know I’m not alone with a four member household. The Sondors three wheel vehicle has a roomy third seat. With three seats, I can easily drop off two kids at school, but with two seats, I’ll have to take a different, far less efficient vehicle. Perhaps a folding design like many SUV or hatchback rear rows could provide the best passenger/cargo flexibility. 2. You have most recently mentioned CCS as the plug format, but I saw an older post that mentioned using CHAdeMO. I think it’s pretty clear that CCS is the format winner. I hope that is the final answer. Also, have you considered partnerships with charging companies like Lucid did with Electrify America? 3. I’m sure you are familiar with both the Rivian and Lucid YOUTUBE channels. I hope you can do something similar when you get your pre-production prototypes out and testing. I’d particularly like to see the Aptera tested in extreme conditions. I live in a high desert climate, so I often see wild swings in temperature and weather. It would also be fun to see Aptera running Laguna Seca, not necessarily to beat other times, but to show off some of the performance and cornering capability. (Most of the world still doesn’t believe a three wheeled vehicle can do something like that without tipping over.) 4. I wonder if you could tell more about the CENTER of GRAVITY for Aptera. One of the big advantages of BEVs like Tesla is the very low CG. This is of course because battery packs are heavy, and putting them low to the ground is how the Tesla Model X was ‘unrollable’ in crash testing. But the ground clearance on the Teslas is generally 5-6 inches, while Aptera is much higher at 9 inches. Have you calculated the CG on both the 100kWh and 40kWh versions? It stands to reason that the lighter battery pack will have a higher overall CG, particularly with a full passenger/cargo load. 5. I understand you have done extensive CFD simulations and driven the original prototypes quite a bit. I read that the crosswind tolerance is in the 120 mph range. That’s a great number, but what about an UPLIFT WIND? Since Aptera is lightweight by design, and also fairly high off the ground (9 inches for the belly), have you tested the vehicle stability with an upward wind vector? I’m thinking about places like high ridgeline roads, bridges, and coastal roads such as CA-1 (think Big Sur) that can have strong gusts with upward trajectory up a slope. 6. As a professional pilot, I’ve been to every corner of the US and many places in Canada. I’ve driven many different cars and trucks in all seasons, roads and weather. While it’s great to drive in warm, sunny weather, often we can find ourselves in INCLEMENT WEATHER, even when least expected. I know that traction control and torque vectoring have come a long way, but certainly it has its limits as well. Low weight can be a disadvantage on wintery roads or thundershower-flooded roadways (both of which can often be accompanied by high winds). Please reassure me that your prototype tests will include as much of these challenging conditions as possible. 7. I believe you mentioned earlier that the WHEEL PANTS will be removable for winter weather (snow/slush buildup is generally undesirable), like airplane wheel pants. Can you confirm this? What about the rear wheel fairing? What are the risks to the hub motors, sensors and wiring harness? Aerodynamic drag (read: range) penalty? I’m guessing most northern folks would remove the fairings for the entire winter season, much like studded/winter tires. 8. I love the efficient aerodynamic design! However as a pilot, I’m aware that extremely low drag designs like from Lancair can have dramatic performance penalties due to PARASITE DRAG from benign things like rain droplets and bug guts. Have you looked at how this will affect Aptera’s range? 9. Some have asked about insurance prices in the past. You have mentioned that insurance companies will likely treat it much like a motorcycle. Some owners of Polaris Slingshot have found that to be untrue, as some underwriters won’t even consider three wheeled vehicles. Much of that is out of your control, but other things depend largely on the manufacturer. One thing Tesla has struggled with in the past was COST and TIME TO REPAIR following a collision. I’ve seen the renderings of the modular body, but this could be good or bad depending upon replacement module availability, and cost, particularly if the impact damages more than one module. What about the cost to replace damaged solar panels? Front wheel assemblies on Apterea are particularly vulnerable in a collision. Since that would mean likely replacing the wheel, hub motor, brake, linkages and fairings, will that total the vehicle? 10. Along those lines, will the WINDOWS and WINDSHIELD be made of automotive tempered glass (glass is heavy, and as a motorcycle you may not be bound by the same windshield standards)? What will be the estimated cost to replace a windshield after rock damage? I know this is extreme, but the large Tesla Model X windshield costs nearly four times the average sedan or SUV windshield. 11. Almost a side note, (as you have no control over this) I noticed that there are currently NO FEDERAL TAX INCENTIVES for three wheeled vehicles. Two-wheel and four or more wheels, but nothing for three wheeled vehicles, according to IRS Tax Form 8936. This is not helpful for sales, and many backward-thinking states like my own, do not offer any incentives at all. In fact my state charges extra highway usage taxes to EV owners, since they don’t pay gasoline taxes. Care to comment on how you plan to market Aptera without federal incentives that other EV manufacturers often use in advertising (at least until they are used up)? 12. As a fairly competent shadetree mechanic, I love your ‘RIGHT to REPAIR’ concept, as I would definitely like to continue doing things like brake jobs, etc. on my Aptera. Have you given any thought as to how you would advise such owners (I think you mentioned providing repair manuals, but what about a tech hotline, or Zoom classes?) and/or would you produce specialty tools needed for repairs? What type of lift or jack would be required to raise the wheels off the shop floor? Wow, that was a lot. I’m really a huge fan of what you guys are doing. Aptera definitely has awesome potential. I truly believe answering the tough questions is the path to making a better product. Thanks again for your tireless efforts in making this a reality!","author_name":"Arthur Anderson","votes":11,"created_at":"2020-10-07T18:01:53Z","canonical_url":"https://wefunder.com/aptera#question-109378","answers":[{"id":110361,"entity_id":"wefunder:comment:110361","answer":"(I'll answer below each question): First off, I wish to echo G. Andris Vaskis and some of the others and thank you for your extensive time and energy it must take for you to personally respond to investors and even fans on this page! I’m an investor and I have been a fan of the design for over a decade! Like some others, I wanted to make a deposit on the first go around, but could not since I didn’t live in California. I’ve attempted to read through these posts to ask intelligent questions, but I apologize if there is still a repeat. I’ve also tried to highlight the main topic of each question. – Thanks for the long-term support! It has helped us accomplish some great engineering over the years. And now you WILL be able to pre-order an Aptera right from the start :) 1. I want to strongly encourage the 3RD SEAT, as soon as possible. This greatly improves the practicality of the vehicle, and I think that is the ultimate goal here: to have an ultra efficient vehicle that you can incorporate into your everyday life. The vast majority of the population has children in their home for much of their adult lives. I know I’m not alone with a four member household. The Sondors three wheel vehicle has a roomy third seat. With three seats, I can easily drop off two kids at school, but with two seats, I’ll have to take a different, far less efficient vehicle. Perhaps a folding design like many SUV or hatchback rear rows could provide the best passenger/cargo flexibility. – We had a third seat in our original design but it didn’t seem very popular so we dropped the idea from current thinking. We can certainly add it back in. 2. You have most recently mentioned CCS as the plug format, but I saw an older post that mentioned using CHAdeMO. I think it’s pretty clear that CCS is the format winner. I hope that is the final answer. Also, have you considered partnerships with charging companies like Lucid did with Electrify America? – We are talking to people in the charging world now and it does seem like CCS will be our path. But we haven’t committed to anything as of now. 3. I’m sure you are familiar with both the Rivian and Lucid YOUTUBE channels. I hope you can do something similar when you get your pre-production prototypes out and testing. I’d particularly like to see the Aptera tested in extreme conditions. I live in a high desert climate, so I often see wild swings in temperature and weather. It would also be fun to see Aptera running Laguna Seca, not necessarily to beat other times, but to show off some of the performance and cornering capability. (Most of the world still doesn’t believe a three wheeled vehicle can do something like that without tipping over.) – We WILL show our progress and as much of the Aptera “in action” as we can. We think people will be surprised by our size and utility. 4. I wonder if you could tell more about the CENTER of GRAVITY for Aptera. One of the big advantages of BEVs like Tesla is the very low CG. This is of course because battery packs are heavy, and putting them low to the ground is how the Tesla Model X was ‘unrollable’ in crash testing. But the ground clearance on the Teslas is generally 5-6 inches, while Aptera is much higher at 9 inches. Have you calculated the CG on both the 100kWh and 40kWh versions? It stands to reason that the lighter battery pack will have a higher overall CG, particularly with a full passenger/cargo load. – We have some CG challenges with our aero shape and need to be off the ground. But we overcome that with strategic placement of weight and an overall lightweight structure. It also helps that we have motor weight all the way out on the wheels. In our previous iteration stability was excellent and we did very well on the skid pad and other stability related tests. We expect to do better with our new version. 5. I understand you have done extensive CFD simulations and driven the original prototypes quite a bit. I read that the crosswind tolerance is in the 120 mph range. That’s a great number, but what about an UPLIFT WIND? Since Aptera is lightweight by design, and also fairly high off the ground (9 inches for the belly), have you tested the vehicle stability with an upward wind vector? I’m thinking about places like high ridgeline roads, bridges, and coastal roads such as CA-1 (think Big Sur) that can have strong gusts with upward trajectory up a slope. – Hmmm. That’s a complex question. But in general, the crosswind simulations we’ve done have accounted for any lift that the vehicle would experience from varying angles of wind direction. The Aptera does create a bit of downforce but the main reason it does well in crosswinds is there is very little flat area for the wind to push on. The rear wheel cover is really the only area to accumulate pressure. 6. As a professional pilot, I’ve been to every corner of the US and many places in Canada. I’ve driven many different cars and trucks in all seasons, roads and weather. While it’s great to drive in warm, sunny weather, often we can find ourselves in INCLEMENT WEATHER, even when least expected. I know that traction control and torque vectoring have come a long way, but certainly it has its limits as well. Low weight can be a disadvantage on wintery roads or thundershower-flooded roadways (both of which can often be accompanied by high winds). Please reassure me that your prototype tests will include as much of these challenging conditions as possible. – For those who will see inclement weather we will offer all-wheel-drive with stability control and torque vectoring. This will keep your wheels well locked to any road condition. We have to do a lot of testing yet, but we feel confident we can have a solid offering for even the coldest climates like in Norway and Sweden. 7. I believe you mentioned earlier that the WHEEL PANTS will be removable for winter weather (snow/slush buildup is generally undesirable), like airplane wheel pants. Can you confirm this? What about the rear wheel fairing? What are the risks to the hub motors, sensors and wiring harness? Aerodynamic drag (read: range) penalty? I’m guessing most northern folks would remove the fairings for the entire winter season, much like studded/winter tires. – The hub motors were designed in Slovenia and have been winter tested thoroughly. They can forge water, snow, ice, mud… Whatever ;) And the wheel pants can be removed but this would only be in an extreme situation like your caught in a rut. For any driving we’d recommend keeping the covers on. We will offer an “off-road” option that gives you lower wheel covers that give you more ground clearance. This may be useful in snow situations where you want to add studs or chains to your tires. 8. I love the efficient aerodynamic design! However as a pilot, I’m aware that extremely low drag designs like from Lancair can have dramatic performance penalties due to PARASITE DRAG from benign things like rain droplets and bug guts. Have you looked at how this will affect Aptera’s range? – In lower speed situation things like rain aren’t a huge impact. But, I don’t personally remember us doing any simulations on this. Though we have done a fair bit of driving in the rain and I don’t recall it being noticeable. We’ll keep it on our list for review as we begin road testing again. 9. Some have asked about insurance prices in the past. You have mentioned that insurance companies will likely treat it much like a motorcycle. Some owners of Polaris Slingshot have found that to be untrue, as some underwriters won’t even consider three wheeled vehicles. Much of that is out of your control, but other things depend largely on the manufacturer. One thing Tesla has struggled with in the past was COST and TIME TO REPAIR following a collision. I’ve seen the renderings of the modular body, but this could be good or bad depending upon replacement module availability, and cost, particularly if the impact damages more than one module. What about the cost to replace damaged solar panels? Front wheel assemblies on Apterea are particularly vulnerable in a collision. Since that would mean likely replacing the wheel, hub motor, brake, linkages and fairings, will that total the vehicle? – Insurance always seems to be difficult. But we had a partnership with Progressive in the past and will seek to partner with some preferred providers that know our vehicles well. Our advanced safety focus will hopefully help us in that pursuit. The repair cost will vary depending on what is damages. But we are building the Aptera in a very modular fashion so in the event of an accident you can order an easily replaced module instead of trying to rebuild things. We will also open up service and build docs so there is info for anyone in the world to do the work for us. This way people in remote locations can still enjoy Aptera knowing they can get parts shipped in 24hrs if needed. The solar panel are all separate and easily replaceable. 10. Along those lines, will the WINDOWS and WINDSHIELD be made of automotive tempered glass (glass is heavy, and as a motorcycle you may not be bound by the same windshield standards)? What will be the estimated cost to replace a windshield after rock damage? I know this is extreme, but the large Tesla Model X windshield costs nearly four times the average sedan or SUV windshield. – The glass will be standard automotive and cost roughly the same to replace as other auto glass. Though we’d prefer repair in most cases to save the production material and energy cost. 11. Almost a side note, (as you have no control over this) I noticed that there are currently NO FEDERAL TAX INCENTIVES for three wheeled vehicles. Two-wheel and four or more wheels, but nothing for three wheeled vehicles, according to IRS Tax Form 8936. This is not helpful for sales, and many backward-thinking states like my own, do not offer any incentives at all. In fact my state charges extra highway usage taxes to EV owners, since they don’t pay gasoline taxes. Care to comment on how you plan to market Aptera without federal incentives that other EV manufacturers often use in advertising (at least until they are used up)? – We’re working on a federal “Ultra Efficient Vehicle Tax Credit” program now. But things seem grid locked in congress for now. Hopefully soon after election we’ll see some movement. 12. As a fairly competent shadetree mechanic, I love your ‘RIGHT to REPAIR’ concept, as I would definitely like to continue doing things like brake jobs, etc. on my Aptera. Have you given any thought as to how you would advise such owners (I think you mentioned providing repair manuals, but what about a tech hotline, or Zoom classes?) and/or would you produce specialty tools needed for repairs? What type of lift or jack would be required to raise the wheels off the shop floor? – There will be lift points at each wheel and four under the belly pan(once removed) and you can use regular floor jacks for any regular service needed. Though we expect regular service intervals to be counted in years and not months. Wow, that was a lot. I’m really a huge fan of what you guys are doing. Aptera definitely has awesome potential. I truly believe answering the tough questions is the path to making a better product. Thanks again for your tireless efforts in making this a reality! – It was ;) But we are grateful for your support and interesting questions! Thanks!","author_name":"Chris Anthony","votes":10,"created_at":"2020-10-14T20:26:29Z"}]},{"id":108393,"entity_id":"wefunder:comment:108393","question":"I had skimmed through your updates and missed the reference to Munro. I had wondered about your ability to transition to manufacturing. To me using Munro for assistance is a big plus. Also I like very much that in general you answer questions here fairly quickly.","author_name":"Terry Mitchell","votes":5,"created_at":"2020-09-30T11:43:08Z","canonical_url":"https://wefunder.com/aptera#question-108393","answers":[{"id":108467,"entity_id":"wefunder:comment:108467","answer":"Thanks, Terry! We're excited about our collaboration with Munro to help us scale up quickly and get Aptera on the road in 2021.","author_name":"Sarah Hardwick","votes":6,"created_at":"2020-09-30T18:48:06Z"}]},{"id":129415,"entity_id":"wefunder:comment:129415","question":"Hi Chris, A general question, You have mentioned that Aptera will potentially go public through SPAC / IPO . In that case, What happens to our investment?. Are we forced to sell our SAFE ? or we will have option to hold our SAFE post IPO.","author_name":"Sachita Bhattrai","votes":4,"created_at":"2021-02-09T01:46:08Z","canonical_url":"https://wefunder.com/aptera#question-129415","answers":[{"id":130656,"entity_id":"wefunder:comment:130656","answer":"Sachita, in the case of any public listing your SAFEs would convert into those publicly traded shares. Thanks for the support!","author_name":"Chris Anthony","votes":2,"created_at":"2021-02-14T06:09:08Z"}]},{"id":118529,"entity_id":"wefunder:comment:118529","question":"Can you tell me what you get as investor? How many shares for each amount of money? And what is the total amount of shares?","author_name":"Gunter Van Den Bossche","votes":4,"created_at":"2020-12-10T21:02:30Z","canonical_url":"https://wefunder.com/aptera#question-118529","answers":[{"id":118564,"entity_id":"wefunder:comment:118564","answer":"Gunter, in this campaign you would invest in a Simple Agreement for Future Equity at $1 per share. That converts into equity in the future at either a 40m pre-money valuation or lower in the future. Basically, you take the value of what you invest and divide it by our valuation in the future, which is set to a max of $40m right now, and that is the percentage of the company, in shares, that you will receive. Click on the \"Learn more about SAFEs\" link on the right-hand side of this page to learn more. Thanks for the question!","author_name":"Chris Anthony","votes":5,"created_at":"2020-12-10T22:40:16Z"}]},{"id":82034,"entity_id":"wefunder:comment:82034","question":"A HEARTFELT THANK YOU Dear Mr. Anthony, my heartfelt thanks in making yourself, a Co-CEO, available to answer any and all questions about the finances and technical details of the Aptera. As a retired Principal Engineer of a major aerospace company I never would have even imagined having direct access to my CEO. Again, thank you for your availability and openness. They instill confidence in Aptera. APTERA GENERATIONS - A SUGGESTION You have indicated in the past confusion sometimes occurs about which generation of Aptera one is talking about. I would suggest, hereinafter, referring to the older model as the Apterix, an extinct flightless bird which is only found in the fossil record, and to the current model as the Aptera, very definitely not a fossil. COLORS Virtually all videos and renderings of the Aptera that I have seen show them in white. I, and many others, live in the Inland North West which has a lot of snow and ice in the colder months. If I were driving in a white Aptera on a curve in the winter and ran out of light, ideas, and traction all at the same time, they wouldn’t find me till the spring thaw. Question 1: What, if any, other colors are likely to be offered and if so would they be considered as a standard item or an extra cost option? RANGE vs. PRICE CHART In your Range vs. Price chart you show the Aptera as having a 1,000 mile range and a cost of $40,000 compared to several other EVs with no mention of those Aptera numbers being estimates. Question 2: Is that pair of Aptera numbers guaranteed? ENERGY PER MILE VARIATION In various places on your web site you show the Aptera having a more or less constant 100 Watt-Hour/Mile rating - which is really, really great compared to other EVs. However, many people, especially pilots, know real performance of all vehicles varies considerably with density altitude and speed. Question 3: Could you please post two different charts each showing, at gross vehicle weight, the Aptera’s Energy/Mile vs. Road Speed in MPH, parametric in Density Altitude in two thousand feet increments from Sea Level to, oh let’s say, 10,000 feet? Note that Leadville, Colorado, is at that altitude and one can both drive to and fly to Leadville. We folk in the Inland North West, of necessity, do a lot of high altitude driving compared to you low altitude San Diego folk. The first chart would be Engineering’s best current calculated estimate and the second chart, made and released after actual road testing, would be what customers really want and need to make accurate energy calculations and would also be a check to Marketing’s propensity for over exuberance. Please, these two charts are vitally important to customer trip planning and would serve as an evidence of Aptera’s engineering excellence. They also would really make Aptera stand out in the market for EVs. To my knowledge, not a single other EV maker in the world does this. BATTERY TOPOLOGY Question 4: Do you plan on using a battery made up of cylinder, prismatic, or pouch cells; how will they be heated and cooled; and how will excess heat be rejected? Question 5: What is the expected kW and amp rating of the onboard J-1772 powered AC-to-DC converter? Question 6: What is the battery’s nominal DC Voltage? Question 7: What is the expected max power a DCFC could charge your expected 400 mile, 40 kWHr, battery? INDEPENDENT STANDBY BATTERY HEATING Many communities in rural areas, especially in high altitude areas of the Inland North West, cannot afford full time, around-the-clock, on-the-job doctors, police, firemen, and other professionals so they have to resort to On-Call professionals who may be at home but must be on site a specified number of minutes after receiving an emergency call. However, many of these areas could also have batteries cold soaked to -30 C to -40 C in the winter rendering an EV undriveable. Question 8: Will a grid connected Aptera have a battery heater that could be programed, for an indefinite duration, to heat and maintain only the battery at an appropriate fully drivable temperature, perhaps +5 C? Heating the seats, cabin, and steering wheel could all come later. What is vitally needed is immediate full drivability around-the-clock in an emergency. The cost of battery heating electricity is irrelevant when On-Call. DELIVERY SEQUENCE \u0026amp; COST OF DELIVERY In the past the company first accepted orders only from Californians. Question 9: Will that continue this go around or will deliveries be accepted from all over the country for delivery in sequence of orders received but after investor’s being given priority? Question 10: How will the Aptera be delivered and will delivery cost be included in the selling price? Question 11: Can a customer get a discount if he takes delivery at the San Diego factory? MARKETING Note the attached screenshot of a recent Plugshare map of high power DCFCs in part of the Inland North West. Note that there is not a single DCFC in all of Wyoming, all of North Dakota, all of South Dakota, the northern half of Nebraska, and the eastern two thirds of Montana. This is a HUGE contiguous geographical area. However, although the population density is low, there would be a very high demand for a very long range EV like the Aptera just to get to the next DCFC while on an away from home trip. Question 12: Is Marketing aware of this potentially large market? Most cordially, Andris Vaskis P.S.: Please give my special greetings and thanks to Eng. Uldis Stīpnieks, who, judging from his name like my own name, has a Latvian heritage. There are very few of us around. P.P.S.: I have a financial interest in Aptera /Users/vaskis/Desktop/Inland-North-West.png","author_name":"G. Andris Vaskis","votes":4,"created_at":"2020-03-10T00:00:55Z","canonical_url":"https://wefunder.com/aptera#question-82034","answers":[{"id":82155,"entity_id":"wefunder:comment:82155","answer":"Andris, thank you for the support! This crowdfunding platform offers a very compelling proposition to investors. You can invest in and question the early plans of great innovations. This simply was not available 5 years ago. Imagine being able to invest in Tesla in its second year and talk to Elon about his ambitions to electrify the world. I think a lot of people would have supported his early efforts and today would be HUGE Tesla fans because of it. We hope to do the same and not only give people the opportunity to grow their investment portfolio with us but also to change the world for the better with us! On your questions: I'll answer below - APTERA GENERATIONS - A SUGGESTION You have indicated in the past confusion sometimes occurs about which generation of Aptera one is talking about. I would suggest, hereinafter, referring to the older model as the Apterix, an extinct flightless bird which is only found in the fossil record, and to the current model as the Aptera, very definitely not a fossil. - This is a great suggestion. But I'm sure people will only focus on our current vehicles once we have them rolling. The past vehicles are great but very different. That will be obvious once people can experience the Aptera of today ;) COLORS Virtually all videos and renderings of the Aptera that I have seen show them in white. I, and many others, live in the Inland North West which has a lot of snow and ice in the colder months. If I were driving in a white Aptera on a curve in the winter and ran out of light, ideas, and traction all at the same time, they wouldn’t find me till the spring thaw. - HA! That is a good observation. And in the early days of Aptera we wanted to keep it white to be immediately recognizable and to make manufacturing easier. Today we are using a lighter weight and easier to apply Vinyl coating to \"color\" the Aptera. Soooo, you can get whatever color you'd like and change it every couple of years if you wish, though that standard wrap will last 7+ years depending on exposure and care. Question 1: What, if any, other colors are likely to be offered and if so would they be considered as a standard item or an extra cost option? - We haven't fully worked this out but are likely to launch with 5 colors and give people the option for custom colors for $1k-ish. RANGE vs. PRICE CHART In your Range vs. Price chart you show the Aptera as having a 1,000 mile range and a cost of $40,000 compared to several other EVs with no mention of those Aptera numbers being estimates. Question 2: Is that pair of Aptera numbers guaranteed? - That may not be an initial option. As we sort out our supply chain we will refine our options and pricing and announce them this summer. ENERGY PER MILE VARIATION In various places on your web site you show the Aptera having a more or less constant 100 Watt-Hour/Mile rating - which is really, really great compared to other EVs. However, many people, especially pilots, know real performance of all vehicles varies considerably with density altitude and speed. Question 3: Could you please post two different charts each showing, at gross vehicle weight, the Aptera’s Energy/Mile vs. Road Speed in MPH, parametric in Density Altitude in two thousand feet increments from Sea Level to, oh let’s say, 10,000 feet? Note that Leadville, Colorado, is at that altitude and one can both drive to and fly to Leadville. - This would be a Steve question as he is the MATLAB modeling guy. But I can say that our current analysis is at sea level with a 2,200lbs vehicle. The altitude implications would be interesting and I can't remember ever seeing a specific number around our efficiency at altitude. We might need to look at setting some range records in the high desert ;) We folk in the Inland North West, of necessity, do a lot of high altitude driving compared to you low altitude San Diego folk. The first chart would be Engineering’s best current calculated estimate and the second chart, made and released after actual road testing, would be what customers really want and need to make accurate energy calculations and would also be a check to Marketing’s propensity for over exuberance. Please, these two charts are vitally important to customer trip planning and would serve as an evidence of Aptera’s engineering excellence. They also would really make Aptera stand out in the market for EVs. To my knowledge, not a single other EV maker in the world does this. BATTERY TOPOLOGY Question 4: Do you plan on using a battery made up of cylinder, prismatic, or pouch cells; how will they be heated and cooled; and how will excess heat be rejected? - We are still vetting cell suppliers but we are leaning towards cylindrical cells. Question 5: What is the expected kW and amp rating of the onboard J-1772 powered AC-to-DC converter? - This is another area we are still working our but a 3kW home connection can get you 400 miles of charge overnight so most will not need any more than that. But 6 or 7kW will probably be an option for us. Question 6: What is the battery’s nominal DC Voltage? - I can say sub 450v, but this is still a bit fluid as we finalize our systems. Question 7: What is the expected max power a DCFC could charge your expected 400 mile, 40 kWHr, battery? - 80kW is probably where this number will be. But it is the battery cell that dictates this max. INDEPENDENT STANDBY BATTERY HEATING Many communities in rural areas, especially in high altitude areas of the Inland North West, cannot afford full time, around-the-clock, on-the-job doctors, police, firemen, and other professionals so they have to resort to On-Call professionals who may be at home but must be on site a specified number of minutes after receiving an emergency call. However, many of these areas could also have batteries cold soaked to -30 C to -40 C in the winter rendering an EV undriveable. Question 8: Will a grid connected Aptera have a battery heater that could be programed, for an indefinite duration, to heat and maintain only the battery at an appropriate fully drivable temperature, perhaps +5 C? - You would only need to do this for maybe 10mins before you start driving. These batteries(all we are considering) can get very cold, you just shouldn't operate them in that cold condition for long. And once you start using them, they heat up fast. Heating the seats, cabin, and steering wheel could all come later. What is vitally needed is immediate full drivability around-the-clock in an emergency. The cost of battery heating electricity is irrelevant when On-Call. DELIVERY SEQUENCE \u0026amp; COST OF DELIVERY In the past the company first accepted orders only from Californians. Question 9: Will that continue this go around or will deliveries be accepted from all over the country for delivery in sequence of orders received but after investor’s being given priority? - We haven't fully set this in stone, but we intend to take orders from everywhere in the world and let people chose if they want early delivery even if service is not set up in their area. Question 10: How will the Aptera be delivered and will delivery cost be included in the selling price? - We hope to deliver every vehicle with a trained person to show you around the vehicle and train you on its operation. That cost will be included in the sales price. Question 11: Can a customer get a discount if he takes delivery at the San Diego factory? YES! And we'd LOVE for everyone to come to see the factory and meet the people building their Aptera! This will also give you a chance to get accustomed to your new Aptera as you drive it home. This will also be a great way for early adopters to get us feedback quickly from a road trip right off the bat. MARKETING Note the attached screenshot of a recent Plugshare map of high power DCFCs in part of the Inland North West. Note that there is not a single DCFC in all of Wyoming, all of North Dakota, all of South Dakota, the northern half of Nebraska, and the eastern two thirds of Montana. This is a HUGE contiguous geographical area. However, although the population density is low, there would be a very high demand for a very long range EV like the Aptera just to get to the next DCFC while on an away from home trip. Question 12: Is Marketing aware of this potentially large market? - We are, and we'd love to see more fast chargers out there. But one of the GREAT attributes of the Aptera is that it uses such little energy it can charge pretty quickly at even level 2 charging. Most cordially, Andris Vaskis P.S.: Please give my special greetings and thanks to Eng. Uldis Stīpnieks, who, judging from his name like my own name, has a Latvian heritage. There are very few of us around. - I WILL P.P.S.: I have a financial interest in Aptera - Thank you for the support! Every investment is a vote for the kind of vehicle efficiency we are trying to bring to the world!","author_name":"Chris Anthony","votes":5,"created_at":"2020-03-10T23:30:50Z"}]},{"id":153568,"entity_id":"wefunder:comment:153568","question":"Hi. I see that you have opened your Reg A+ round and that after it is over there will be about 65 million shares including both Class A and Class B shares. At what price did Wefunder investors buy their shares at? Would it just be calculated from the valuation, so using the $40m valuation it would be $0.76 per share? Is it possible for our shares to be transferred over to an Aptera investor account, so we can keep track of them? Thank you for answering my questions.","author_name":"Hulusi Inanoglu","votes":3,"created_at":"2021-06-11T17:36:27Z","canonical_url":"https://wefunder.com/aptera#question-153568","answers":[{"id":154818,"entity_id":"wefunder:comment:154818","answer":"Yes, the calculus is a bit tricky but it works out to $.44 for the first WeFunder round and $.80 for the second round. Thanks for the support!","author_name":"Chris Anthony","votes":0,"created_at":"2021-06-25T02:44:37Z"}]},{"id":130203,"entity_id":"wefunder:comment:130203","question":"1.) Which iteration of the vehicle do you think may end up on the Jay Leno show? Beta, Charlie, Delta? How many wayfinding vehicles do you think there will be between now and then? 2.) Could you please elaborate on how 3D printing will be utilized in the manufacturing/tool making process? 3.) Could you share to what degree Sandy Munro is involved in advising your team? Is he involved mainly to help with manufacturing or with design as well? Any specific examples of things that Sandy has contributed to the design that will be in the production versions? 4.) What are the disaster scenarios that could completely derail the company if they occurred? 5.) What are you looking for in Brand Ambassadors? Do you feel YouTubers are a good fit? 6.) If someone were to invest $100 into Aptera right now, will their $100 investment appreciate before the IPO/SPAC occurs, or will it just be converted directly into $100 worth of stock? PS, I'm working on a video to describe how the investment process works on Wefunder, for Aptera, so if there's anything that you'd like me to quote you on in the video, let me know and I'll add it! It bugs me seeing everyone asking you the same question on here over and over, when your time could be better spent elsewhere, so I want to help where I can. It would be cool if Wefunder's UI had some sort of AI built in, to recognize context as people are typing their questions, and suggest previous answers to similar questions. Thanks Chris! \"Lester The Investor\" (YT)","author_name":"Lester Erwin","votes":3,"created_at":"2021-02-12T04:44:25Z","canonical_url":"https://wefunder.com/aptera#question-130203","answers":[{"id":131351,"entity_id":"wefunder:comment:131351","answer":"Lester, I'll answer bellow: 1.) Which iteration of the vehicle do you think may end up on the Jay Leno show? Beta, Charlie, Delta? How many wayfinding vehicles do you think there will be between now and then? I think the Delta version will be driveable by press later this year. -- I imagine we will build a dozen + vehicles to get there. 2.) Could you please elaborate on how 3D printing will be utilized in the manufacturing/tool making process? -- 3D Printing helps us prototype different elements for fit and function quickly. We also aspire to 3D print some plugs for composite mold making which will speed parts to production and allow us to make changes quickly and cheaply. 3.) Could you share to what degree Sandy Munro is involved in advising your team? Is he involved mainly to help with manufacturing or with design as well? Any specific examples of things that Sandy has contributed to the design that will be in the production versions? -- Sandy is an investor and he and his company will help us get things in shape for production. They will help us analyzing parts for their manufacturability and assembly efficiency, and by helping us design our assembly lines and our factory for optimal output. 4.) What are the disaster scenarios that could completely derail the company if they occurred? -- GLOBAL THERMAL NUCLEAR ANIALATION! And other supply chain disruptions that could delay things. Covid has not been helpful but we've been working well through it. We'd love to see some tariffs lifted to smooth worldwide supply chains, too. 5.) What are you looking for in Brand Ambassadors? Do you feel YouTubers are a good fit? -- Anyone with a passion for Aptera and our goals to make the world a more efficient place is probably a good fit. 6.) If someone were to invest $100 into Aptera right now, will their $100 investment appreciate before the IPO/SPAC occurs, or will it just be converted directly into $100 worth of stock? -- I can't comment specifically on our possible stock appreciation but we are working to continually build shareholder value. Though, you can look at numerous companies who have had a growth path through to SPAC or IPO with explosive stock value appreciation. We feel our company has a compelling business model and interesting advantages over any other transportation player. We hope that this translates to impressive returns for our investors. Thanks for your support and good luck with your YouTube efforts!","author_name":"Chris Anthony","votes":3,"created_at":"2021-02-19T01:32:48Z"}]},{"id":106203,"entity_id":"wefunder:comment:106203","question":"Chris,Can you please including\u0026nbsp;a date for the questions and answers ? Otherwise the readers are not sure how outdated those questions and answers, maybe five years old, not relevant to today’s technology or situation.Thanks","author_name":"Eric Liang","votes":3,"created_at":"2020-09-14T17:55:13Z","canonical_url":"https://wefunder.com/aptera#question-106203","answers":[{"id":106539,"entity_id":"wefunder:comment:106539","answer":"Eric, all the answers should be date stamped in the upper right corner of each question and answer ;) But I'll bring up with WeFunder about adding in a year. Thanks.","author_name":"Chris Anthony","votes":2,"created_at":"2020-09-17T06:15:17Z"}]},{"id":64394,"entity_id":"wefunder:comment:64394","question":"A couple of questions I was also going to ask. 1)Will the Aptera have active thermal management of the battery pack? 2)Also what are you thinking of using a spare tire with a special jack in case of a flat tire or fix a flat? 3)Will the car have a proximity key and/ or a bluetooth connection via smartphone to unlock the doors? 4)Will the car need a push button start once inside the car or automatically when the brake is applied?","author_name":"Jordan Tolliver","votes":3,"created_at":"2019-09-26T18:52:50Z","canonical_url":"https://wefunder.com/aptera#question-64394","answers":[{"id":64431,"entity_id":"wefunder:comment:64431","answer":"Jordan, I'll answer your questions in order: 1)Will the Aptera have active thermal management of the battery pack? - Yes, our battery modules will have active cooling. 2)Also, what are you thinking of using a spare tire with a special jack in case of a flat tire or fix a flat? - The Aptera will come with a fill kit for tire emergencies but likely no jack or spare tire as they simply weight too much to lug around regularly. 3)Will the car have a proximity key and/ or a Bluetooth connection via smartphone to unlock the doors? - We have not made a final selection on this but the Aptera will have proximity detection. 4)Will the car need a push-button start once inside the car or automatically when the brake is applied? - The Aptera will automatically be \"on\" when you enter the vehicle. But you will need to depress the brake pedal to switch into any gear. -- Thanks for the questions!","author_name":"Chris Anthony","votes":5,"created_at":"2019-09-27T01:26:25Z"}]},{"id":156073,"entity_id":"wefunder:comment:156073","question":"Wefunder Support did get back to me regarding my investment that has been in \"Funded\" status since January. The email was from three (3) days ago and they said they will be finalizing payments and preparing disbursements (to Aptera) over the \"next couple weeks\". Once funds are disbursed, investment status will change to \"confirmed\". Many here are in the same boat and hopefully we are getting really close!","author_name":"Sarah Zhou","votes":2,"created_at":"2021-07-03T03:39:56Z","canonical_url":"https://wefunder.com/aptera#question-156073","answers":[{"id":167689,"entity_id":"wefunder:comment:167689","answer":"Thanks for the support, Sarah. I see that you made it into this round and your investment has been processed. Thanks!","author_name":"Chris Anthony","votes":1,"created_at":"2021-09-03T18:14:53Z"}]},{"id":154253,"entity_id":"wefunder:comment:154253","question":"For everyone wondering what price Wefunder investors invested in Aptera at, I contacted Aptera and they said \"the share price in the previous round was roughly $0.76.\" That's for the 40 million dollar valuation cap, so I assume it would be roughly $0.38 for people who got in at the 20 million dollar valuation cap. I guess this means that Wefunder investors really did get a 5x or 10x return on their investment!","author_name":"Hulusi Inanoglu","votes":2,"created_at":"2021-06-20T16:31:53Z","canonical_url":"https://wefunder.com/aptera#question-154253","answers":[{"id":154819,"entity_id":"wefunder:comment:154819","answer":"Yes, sir, we appreciate all the support and will continue to strive for increased shareholder value! I think someone rounded those prices though. They look a bit off...","author_name":"Chris Anthony","votes":1,"created_at":"2021-06-25T02:44:39Z"}]},{"id":135480,"entity_id":"wefunder:comment:135480","question":"Will you do another raise now that the SEC has raised the limit amount?","author_name":"Mario M Teel Jr.","votes":2,"created_at":"2021-03-17T15:58:06Z","canonical_url":"https://wefunder.com/aptera#question-135480","answers":[{"id":138022,"entity_id":"wefunder:comment:138022","answer":"We're looking to launch our new funding platform in the next 4 to 6 weeks. Thanks for your support!","author_name":"Chris Anthony","votes":2,"created_at":"2021-03-27T01:15:37Z"}]},{"id":134724,"entity_id":"wefunder:comment:134724","question":"Chris, I'm told you have a thing for cup holders. As someone who drives for a living, I'm a bit obsessed with them as well. I've been longing for a cup holder that would keep my water bottles or Gatorade cool on long drives. How hard would it be to blend a cup holder and an a/c vent into one device? Drink cooling with no extra energy cost and probably little to no build cost depending on the implementation. ...... Chris I think you missed the point, or, just don't like it, which is fine. But if one of the AC vents exhausted through a cup holder, you'd be chilling a drink for free. No need to use any extra power.","author_name":"Jeffery Legere","votes":2,"created_at":"2021-03-13T05:30:29Z","canonical_url":"https://wefunder.com/aptera#question-134724","answers":[{"id":134820,"entity_id":"wefunder:comment:134820","answer":"You're in luck :) And I do love cup holders ;) They seem to have a lot of USB and 12v options for aftermarket coolers now: https://www.amazon.com/Premium-Perfect-Commuter-Thanksgiving-Presents/dp/B077PBQ89B This may be something we can offer as an option too, in the future. But for now, I think you'll be set :) Thanks for the support!","author_name":"Chris Anthony","votes":1,"created_at":"2021-03-13T23:16:03Z"}]},{"id":133597,"entity_id":"wefunder:comment:133597","question":"I was wondering if I could contact you about investing ($250,000)","author_name":"David Boisvert","votes":2,"created_at":"2021-03-05T05:17:10Z","canonical_url":"https://wefunder.com/aptera#question-133597","answers":[{"id":133728,"entity_id":"wefunder:comment:133728","answer":"Thanks for the offer of support. This round is closed but we will be opening a new round soon. If you'd like more detailed info, please email us at info@aptera.us","author_name":"Chris Anthony","votes":2,"created_at":"2021-03-05T23:58:34Z"}]},{"id":132808,"entity_id":"wefunder:comment:132808","question":"Hi Chris. Do you know about regen electric motors? If you had that included in your back wheel as it moves it would recharge the batteries as well as Solar cells. I am 53 and have good engineering experience. Plus a welding degree. I have owned 2 companies. Love to work for you if you have any positions? 720-940-3948 Monty Stein","author_name":"Monte Stein","votes":2,"created_at":"2021-02-28T00:27:27Z","canonical_url":"https://wefunder.com/aptera#question-132808","answers":[{"id":133190,"entity_id":"wefunder:comment:133190","answer":"Thanks, Monty. We are using regenerative braking. If you could be of help please forward any info to info@aptera.us Thanks!","author_name":"Chris Anthony","votes":1,"created_at":"2021-03-02T07:15:03Z"}]},{"id":129704,"entity_id":"wefunder:comment:129704","question":"Chris, I am an accredited investor and there is a note on the overview page that you can accept accredited investors outside of the normal funding rounds. However I can't find the link to the accredited investor page. Can you help me out?","author_name":"Michael Rupp","votes":2,"created_at":"2021-02-10T03:52:17Z","canonical_url":"https://wefunder.com/aptera#question-129704","answers":[{"id":130654,"entity_id":"wefunder:comment:130654","answer":"Michael, we already closed out this round. But we will hopefully be opening up a new round in March/April of this year which will be open to all. Please sign up for updates at the bottom of www.Aptera.us or follow our social media to stay up to date. Or you can e-mail us directly at info@aptera.us Thanks for the support!","author_name":"Chris Anthony","votes":1,"created_at":"2021-02-14T06:07:27Z"}]},{"id":129111,"entity_id":"wefunder:comment:129111","question":"When are you planning be public? Via SPAC or IPO?","author_name":"Jose Garzon","votes":2,"created_at":"2021-02-07T19:15:08Z","canonical_url":"https://wefunder.com/aptera#question-129111","answers":[{"id":130653,"entity_id":"wefunder:comment:130653","answer":"In the next 24 months.","author_name":"Chris Anthony","votes":1,"created_at":"2021-02-14T06:06:31Z"}]},{"id":126950,"entity_id":"wefunder:comment:126950","question":"Hello Chris, What are the next steps / expectations for the investors of the previous round? Do we just wait? Also, just wondering about your thoughts on taking advantage of current SPAC environment for EV sector. Have you considered it :-)","author_name":"Sreenath Nampally","votes":2,"created_at":"2021-01-28T15:43:20Z","canonical_url":"https://wefunder.com/aptera#question-126950","answers":[{"id":127582,"entity_id":"wefunder:comment:127582","answer":"Sreenath, it is a waiting game. But hopefully an exciting one over the next year :) We are considering SPACs and an IPO in the next 24 months. We appreciate the support!","author_name":"Chris Anthony","votes":2,"created_at":"2021-01-31T05:12:49Z"}]},{"id":123409,"entity_id":"wefunder:comment:123409","question":"Be sure to add the link to the Munro Associates video that just dropped: https://youtu.be/4DhzkUnIh58 They way y'all talk to each other shows that you have been working witht them for quite a while and that Sandy is very excited about what you are doing.","author_name":"John Overstreet","votes":2,"created_at":"2021-01-07T17:53:04Z","canonical_url":"https://wefunder.com/aptera#question-123409","answers":[{"id":123677,"entity_id":"wefunder:comment:123677","answer":"We will :) Thanks!","author_name":"Chris Anthony","votes":1,"created_at":"2021-01-08T21:23:51Z"}]},{"id":119246,"entity_id":"wefunder:comment:119246","question":"Hi Chris, appreciate your quick response. I have another question. I read that Aptera have receiveed over $100m worth of orders, can you share a little bit of your plan to fund the production of the vehicles? I assume some massive new capital will have to be raised for this exciting and daunting task.","author_name":"Zhi Feng Xia","votes":2,"created_at":"2020-12-14T00:47:34Z","canonical_url":"https://wefunder.com/aptera#question-119246","answers":[{"id":119409,"entity_id":"wefunder:comment:119409","answer":"Zhi, we have plans to launch more fundraising efforts to raise the $25-50m we will need to ramp up production quickly. The more pre-orders we have the easier that fundraising will be. But yes, it will be work and will take private and public fundings to make it happen. We feel good about all the support we have so far and feel confident in our abilities to execute all around ;) Thanks for the support!","author_name":"Chris Anthony","votes":1,"created_at":"2020-12-14T23:00:41Z"}]},{"id":119054,"entity_id":"wefunder:comment:119054","question":"How do you feel Aptera's price point and appeal compared to tesla model 3? What would be the compelling reason for people to choose a three wheeled aptera over a model 3?","author_name":"Zhi Feng Xia","votes":2,"created_at":"2020-12-13T05:59:30Z","canonical_url":"https://wefunder.com/aptera#question-119054","answers":[{"id":119147,"entity_id":"wefunder:comment:119147","answer":"Zhi, we love the Model 3 and a lot of other EVs. But I don't think we really compare to anything. There is simply nothing nearly as efficient and unique as Aptera. But we hope the world likes what we have to offer ;)","author_name":"Chris Anthony","votes":2,"created_at":"2020-12-13T10:16:28Z"}]},{"id":118457,"entity_id":"wefunder:comment:118457","question":"Are you going to come in Europe soon?","author_name":"Mititelu Silviu","votes":2,"created_at":"2020-12-10T13:20:35Z","canonical_url":"https://wefunder.com/aptera#question-118457","answers":[{"id":118563,"entity_id":"wefunder:comment:118563","answer":"We are! Hopefully, some of our first vehicle batches will be headed that way. Thanks for the support, Mititelu!","author_name":"Chris Anthony","votes":1,"created_at":"2020-12-10T22:40:01Z"}]},{"id":118093,"entity_id":"wefunder:comment:118093","question":"Hi Chris, In the Wikipedia page it says \"In April 2012, the Chinese automaker Zhejiang Jonway Group purchased the intellectual property of Aptera from creditors\". I am interested in investing. But can you please explain more about patent/IP ownership?","author_name":"Harish Pillai","votes":2,"created_at":"2020-12-08T19:39:33Z","canonical_url":"https://wefunder.com/aptera#question-118093","answers":[{"id":118123,"entity_id":"wefunder:comment:118123","answer":"Harish, unfortunately, this round is oversubscribed so the late investors will not be able to join. But yes, we re-established Aptera in early 2019 and rebuilt our IP portfolio, and filed for the needed trademarks and such. We have no affiliation with Zhejiang Jonway but are forging our own path with our innovative solar power EV. Thanks for your interest and support!","author_name":"Chris Anthony","votes":1,"created_at":"2020-12-08T22:06:44Z"}]},{"id":118084,"entity_id":"wefunder:comment:118084","question":"Do you have any financial data? Amount of stock which has been issued? How you determined valuation? Current sales and sales predictions? I want to invest, but I see no data, no information. Your car is cool. I'll probably buy one when it comes out.","author_name":"Brian Korsedal","votes":2,"created_at":"2020-12-08T18:53:42Z","canonical_url":"https://wefunder.com/aptera#question-118084","answers":[{"id":118122,"entity_id":"wefunder:comment:118122","answer":"Brian, we just started pre-orders on Friday and have not put out any guidance yet. The financials info we can put out for now is lower in our story on this page. The cap table is also included. But this round is WAY oversubscribed so the late investors will not anything this round. Sorry, but thanks for your interest and support!","author_name":"Chris Anthony","votes":1,"created_at":"2020-12-08T22:03:11Z"}]}],"faq":[{"question":"$1,070,000 isn't going to be close to enough to get you to production, what are your plans for continuing to raise funds going forward?","answer":"Good question Andrew, we are raising this crowdfunding in conjunction with private funding to get our first validation prototypes built. After those vehicles are well underway we will begin raising limited production funding which will likely be in the $20m range. The funding needed to truly scale the company and develop new models after that is yet to be determined. But we feel it is a fraction of what it would take a traditional automotive company to scale an electric vehicle platform. This..."},{"question":"As a technologist and as someone who cares about the environment, I naturally like EV's. That said, I also like fiscal prudence. Bluntly, needing 400M loan to survive is, frankly, profligate to start with. How will you guaruntee potential future investors that this type if pro...","answer":"Francis, your frugality is shared whole heartedly with the founders of Aptera. And, while there are no guarantees to be had here, there is a passion for efficiency in our new venture that bleeds through everything we do. From the design of our vehicles, to the way we engineer them, and on to the way we budget, manage, and strategize for success. This passion was built by Steve, Michael, and myself over many years not only with Aptera but in all the other aspects of our lives. Doing more with ..."},{"question":"Seems like a very interesting project and glad it's coming back to life. In thinking about your projected margins for 2022 of 35% - how are you backing into that and how realistic is it? Comparing it to the traditional margins of gas cars around 8-9% it seems like a stretch. H...","answer":"Congrats on the Model 3 purchase. I hope you are having fun with it. What we are really aspire to do is to make as big an impact on transportation energy use as possible. Making the most efficient vehicles possible is our first step but we certainly must get them out in to the world to do more. I think we could do limited numbers with a $100k sticker price but we think that, with the fuel savings calculated in, consumer would be most interest in our first vehicles at a $34 to $60k price point..."},{"question":"Any chance you can re-claim the old Facebook Page? https://www.facebook.com/Aptera-Motors-162637290413204","answer":"Hopefully ;)"},{"question":"Just wonder if your manufacturing and production plan is already set up or ready to go, including suppliers or subcontracts, etc.","answer":"While we have a production plan in place it does not include some key items and will require a lot of refinement as we get closer to production. Suppliers, contractors, space and equipment are all being evaluated as we progress."}]}}}